What are the precautions for using gear pumps?
Release date:2019-01-18 作者: Click:
NowadaysGear pumpThe manufacturer will share with you what are the precautions for using the gear pump; friends who don't know yet can come in and have a look!
What should I avoid while using a gear pump?
Gear pumps are suitable for various industries, and the range of conveyed media is relatively common. This gear pump has a solid structure, convenient installation, easy disassembly, simple maintenance, uniform and continuous flow, slight wear, long service life, etc.-some worry points.
1. In the process of using the gear pump, it is necessary to add grease frequently. The grease is relatively easy to volatilize, so you must pay attention to adding and changing, and then keep the bearing clean;
2. Put the electric oil pump in a relatively dry, non-corrosive, and relatively clean environment after use or after use;
3. The gear pump should be inspected and repaired frequently during use, and attention should be paid to the electric oil drum to check the power cord inside; whether the internal wiring, plug, switch can still be used normally; whether the bearing parts are damaged Place wait some;
4. Every component on the gear pump should be preserved. During the process of disassembling and inspecting the gear pump, every component should be preserved and kept clean;
The URL of this article: http://www.sccjyy.cn/news/407.html
Key words:Gear pump,Gear pump price,Gear pump manufacturers
Recently Viewed:
- Research on Application and Development of Hydraulic Control Technology
- Caring for employees, caring for health and long-term solution, organizing all employees to conduct health examinations
- Analysis of Causes of Common Gear Pump Bearing Failures
- How to maintain the gear pump to make its life longer?
- Changjiang Hydraulics won the title of "2018 Outstanding Contribution Award for Economic Development" in the High-tech Zone
- Summary of maintenance and repair points of hydraulic cylinders
Related Products:
related news:
- Causes of noise in gear pumps
- What are the reasons for the gear pump oil seal being flushed out?
- Measures to reduce vibration and noise of gear pump
- Reasons for the motor heating during the use of the gear pump
- Press the "accelerator key" for epidemic prevention and production
- What are the techniques to prevent the gear pump from clogging?
- Changjiang Hydraulics won the title of "Demonstration Enterprise for Establishing Modern Enterprise System"
- What are the sealing methods for Luzhou hydraulic gear pumps?
- Contact strength and bending strength of gear oil pump
- What is the difference between a gear pump and a screw pump?